Elektra Manual Thermostat c/w Floor Sensor – OTN-1991

“This Manual Dial thermostat utilised for the accurate control of electric underfloor heating.”

Descriptions:

This Manual Dial thermostat utilised for the accurate control of electric underfloor heating. Integral on/off switch for when you do not require heating. Will control up to 3600W and 16Amp. With a graduated scale (5 to 40oC), making it easy to set the required floor temperature. The scale can also be adjusted so that the min & max temperatures are limited. Manual Control White Thermostat is Flush mounted in a standard flush back box.

Features:

• 16 Amp
• Manual Dial
• Flush
• 3 Year Warranty

Please Note – Must use the floor sensor supplied with the thermostat.

Installation Instructions:

Remove the dial by just simply pulling, this should reveal a screw, remove this to take the front plate of thermostat. Terminate the thermostat as the diagram below shows. The thermostat can now be fitted into a wall-mounted box, screwing the back case to the mount. Replace the front of the thermostat and tighten the screw to secure the thermostat together before replacing the dial as well.

Frequently Asked Questions:

1. What is the maximum wattage this thermostat can control?

The thermostat can control up to 3600W.

2. Can I adjust the temperature range?

Yes, the scale can be adjusted so that the min & max temperatures are limited.

3. Is the thermostat flush mounted?

Yes, the Manual Control White Thermostat is flush mounted in a standard flush back box.

Conclusion:

The Elektra Manual Thermostat c/w Floor Sensor – OTN-1991 is a reliable and accurate control solution for electric underfloor heating. With its manual dial and graduated scale, it is easy to set the desired floor temperature. The thermostat is flush mounted and comes with a 3-year warranty, ensuring long-lasting performance. Make sure to follow the installation instructions and use the supplied floor sensor for optimal functionality.